Accessories

BU-2 Holder with a universal joint
BW-1 Double holders with a universal joint
BKI-5 Injection holder
BG-1 Magnet stand (to attach the manipulator）
BG-2 Magnet stand (to attach the manipulator)
BG-3 Magnet stand (to attach the manipulator)
BSA-1 Stand for stereotaxic instrument (to attach the manipulator)
BA-1 Mouting adaptor for microscope 
BAK-1 Mouting adaptor for condenser
BIR　Steel plate for magnetic stands


Oil hydraulic micro minipulator / Manual minicromanipulator / mini-micromanipulator / Manual 3-D joystick micromanipulator /Injector 

BU-2　Holder with a universal joint

・The depth of a pipette holder is reduced as a holding screw is placed above a holding bar. The structure also allows to get access to a holding screw and adjust an angle of a pipette holder easily.
・It is easy to set the angle of a pipette holder as there is an angle scale of 30 degrees. 
・A shake and bow movement of a pipette holder is available. It is easy to adjust an angle of a pipette holder horizontally and vertically. 

※An injection holder (BKI-5) is not included.
※Click for zoom-up

Size	W80mm×D24mm×H45mm 45g

BW-1　Double holders with a universal joint

・Double holders accomodate two pipette holders and allow to use them alternately. With a X axis adjustment knob which can change the location of a pipette holder on X axis, a pipette can be replaced from one to another easily.
・The depth of a pipette holder is reduced as a holding screw is placed above a holding bar. The structure also allows to get access to a holding screw and adjust an angle of a pipette holder easily.
・It is easy to set the angle of a pipette holder as there is an angle scale of 30 degrees.
・A shake and bow movement of a pipette holder are available. It is easy to adjust an angle of a pipette holder horizontally and vertically.

※An injection holder (BKI-5) is not included.
※Click for zoom-up

Size	W80mm×D24mm×H60mm 63g

BKI-5　Injection holder

※Click for zoom-up

Adaptable glass capillary φ	1mm Φ
Teflon tubeφ	ID：0.8mm　OD：1.5mm
Size	Length: 105mm,  φ: 4mm, 9g

BG-1・BG-2・BG-3　Magnet stand

・It is easy to operate a micromanipulator as nothing is above a manipulator and a magnet is underneath a manipulator. A magnet enables an easy installation.
・The height of a holding bar is adjustable.
 
※Click for zoom-up

Cat#	BG-1	BG-2	BG-3
Bar Φ	10mm	10mm	6mm
Attachment bar height	0～200mm	0～140mm	0～55mm
Size(mm), Weight	W60×D80×H150 1100g	W50×D58×H100 500g	W37×D35×H35 5g

 

BSA-1　Stand for stereotaxic instrument

・This stand is compatible with any kind of stereotaxic instruments and allow to install a micromanipulator on your stereotaxic instrument.

※Click for zoom-up
 

Bar Φ	10mm
Attachment bar height	20～55mm
Size(mm), weight	W70×D55×H80 220g

BA-1　Mouting adaptor for microscope (compatible with all the manufacturer and models.) 

・Magnets and steel plates for magnets are not necessary because BA-1 is directly attached to a microscope. It is easy to install it to a microscope.
・All the models of the microscopes are adaptable.
・Easy and close access to the sample is performed because BA-1 mounting adaptor is directly attached to the microscope. This avoids vibration and leads to stable operation.
・The length of the manipulator attachment bar is adjustable with the compliment bar. Φ6mm bar is available for a mini-micromanipulator. The manipulator attachment bar is ajustable horizontally and vertically.

※ Click for zoom-up

Manipulator attachment bar Φ	10mm
Size	W120mm×D150mm×H70mm 370g

※ φ6mm manipulator attachment bar is available.

※ If the slide bar is changed to 300 mm long, The length is 300 mm. 

BAK-1　Mounding adaptor for condenser

・A magnet stand and stee plate are not required for installation as a mouting adaptor can be attached to a stereo microscope directly. A mouting adaptor can be installed easily.
・A mounting adaptor is compatible with any kind of stereo microscope as it can be attached to any shape of a stereo microsope stand by using bracket.
・The direct attachment of a mouting adaptor to a stereo microscope shotens the distance between a micromanipulator and sample and makes an operation stable as vibration is reduced during operation.
・A manipulator attachment bar can be set up vertically and horizontally and the length of a bar can be extended by attaching an compliment bar. A mini-manipulator is also compatible as Φ6mm manipulator attachment bar is available.

※Click for zoom-up

Manipulator attachment bar Φ	10mm
Size	W85mm×D60mm×H65mm 135g

※φ6mm manipulator attachment bar is available

BIR　Steel plate for magnet stands

・Non-slip rubber on the bottom avoids the slip of the plate during the experiments.
・Non-slip rubber makes the plate small and light.

Size	W200mm × D300mm × H30mm
Weight	600g

Lifescience instrument

in vivo & in vitro electroporator

in vivo electroporator

in vitro electroporator

Cell fusion unit

Cables and Accessaries

genopal® - DNA chip analysis

micromanipulator

designing and developing