HOME > product > Lifescience instrument > micromanipulator / Manual micromanipulator

Manual micromanipulator

BMJ-1 Manual 3-D low and high resolution micromanipulator with a joystick
BMF-1 Manual 3-D low and hgih resolution micromanipulator
BMM-1 Manual 3-D micromanipulator (high and low resolution on X axis only)
BMM-2 Manual 3-D low resolution micromanipulator
BMM-3 Manual 3-D low resolution micromanipulator (three handles on one axis)

※Please use BG-1 or BG-2 as a magnet stand for our micromanipulators like below:

Oil hydraulic micro minipulator / mini-micromanipulator / Manual 3-D joystick micromanipulator / Injector / Accessories

BMJ-1　Manual 3-D low and high resolution manicromanipulator with a joystick

・Vibration caused by joystick operation is transferred from an attachment adaptor to the holding bar. The unique structure provides the smooth operation (See fig.1)
・A joystick enable a coarse movement on XY area.
・Coaxial handles for a coarse and fine movement on XYZ axis enable a smooth operation.
・This model can be installed on either right or left side.

※Click for zoom-up

Accessories	Holder with a ball joint（BB-1）　Pipette holder（BK-4）
Movement range	[Fine movement] Each X/Y/Z axis: 5mm　One rotation of a handle：500μm
	[Coarse movement] Each X/Y/Z axis: 25mm
	[Joystick] Maxinum movement on XY axis: 2mm
Size	W150×D75×H190mm　360g

BMF-1　Manual 3-D low and high resolution micromanipulator

・Handles on XYZ axes enable a coarse and fine 3-D movement manually.
・Coaxial handles for a coarse and fine movement on XYZ axis enable a smooth.
・The width is only 10 cm and the distance to the sample is very short. The compact design gives more space on the stage of a microscope.
・This model can be installed on either right or left side.

※Click for zoom-up

Accessories	Holder with a ball joint（BB-1）　Pipette holder（BK-4）
Movement range	[Fine movement] Each X/Y/Z axis: 5mm　One rotation of a handle：500μm
Movement range	[Coarse movement] Each X/Y/Z axis: 25mm
Size	W150×D75×H190mm　360g

BMM-1　Manual 3-D micromanipulator (high and low resolution on X axis only)

・Handles on XYZ axes enable a coarse 3-D movement manually. A fine movement on X axis is also possible.
・Coaxial handles for coarse movement on Y and Z axis are vertically parallel to ones for a corse and finemovement on X axis. The unique design allows to operate a manipulator smoothly.
・The design of vetically parallel handels enables to install two or more manipulators side by side.
・The width is only 10.5 cm and the distance to the sample is very close. The compact design gives more space on the stage of a microscope.
・This model can be installed on either right or left side.

※Click for zoom-up

Accessories	Holder with a ball joint（BB-1）　Pipette holder（BK-4）
Movement range	[Fine movement]X 5mm　One rotation of a handle：500μm
Movement range	[Coarse movement] X axis: 25mm　Each of Y/Z axis: 30mm
Size	W105×D35×H90mm　230g

BMM-2　Manual 3-D low resolution micromanipulator

・Handles on XYZ axes enable a coarse 3-D movement manually.
・Handles for a coarse movement on Y and Z axis are coaxial and are vertically parallel to ones for a coarse movement on X axis. The unique design allows to operate a manipulator smoothly.
・The design of vertically parallel handles enables to install two or more manipulators side by side.
・The width is only 9.5 cm respectively. The distance to the sample is very close. The compact design gives more space on the stage of a microscope.
・This model can be installed on either right or left side.

※Click for zoom-up

Accessories	Holder with a ball joint（BB-1）　Pipette holder（BK-4）
Movement range	[Coarse movement] Each X/Y/Z axis: 30mm
Size	W95×D35×H90mm　210g

BMM-3　Manual 3-D low resolution micromanipulator (three handles on one axis)

・Handles on XYZ axes enable a coarse 3-D movement manually.
・Handles for a coarse movement on X, Y and Z axis are coaxial. Three handles on one axis facilitate the manipulator operation considerably.
・The design of vertically parallel handles enables to install two or more manipulators side by side.
・The width and height are only 10 cm and 7 cm respectively. The distance to the sample is very close. The compact design gives more space on the stage of a microscope.
・This model can be installed on either right or left side.

※Click for zoom-up

・Multi-setting with three units of BMM-3s as an option.

※Example of multi-setting

※Click for zoom-up

Accessories	Holder with a ball joint（BB-1）　Pipette holder（BK-4S）
Movement range	[Coarse movement] Each X/Y/Z axis: 15mm
Size	W100×D35×H70mm　140g